The more time we spend cleaning the kitchen, the dirtier it looks. Even if it seems everything is shiny, most likely the filter of the extractor hood was left untouched. Some people just forget about it in the process of cleaning the kitchen, while others just don’t know how to do it correctly.

FotoDuets / Shutterstock.com

We have prepared 3 effective and cheap ways to make your extractor hood look brand new. Are you excited? Then put the gloves on, get down to work, and you will be amazed with the result!

st.noon / Shutterstock.com

The first way

Before you start, try to look for the baking tray where the filter would fit. If you don’t have it, the saucepan will do. At first, pour the boiling water into the chosen reservoir. Dilute the soda at a rate of 5 tablespoons per 33.8 oz (1 liter). Pour it gradually so that it doesn’t boil.

Now, lower the filter and leave it for 10-15 minutes. You can boil it if there are no plastic elements. After that, clean the dirt with a toothbrush or sponge.

Dmitri Ma / Shutterstock.com

The second way

Put the sponge into the acetic acid. Wipe all dirty areas, paying special attention to the oldest spots. If the case is complicated, leave it for up to 12 minutes, and if not – up to 7. For fresh contaminants, it is better to dilute the acid with water in the proportion of 1 to 2. But for the old ones, the pure concentrate is much better. In the end, rinse it well, lather the filter with a dish soap, and wipe with a sponge.

Andrey_Popov / Shutterstock.com

The third way

Peel 1-2 lemons, cut them in half. Grind the filter with the pulp and leave it in a tightened bag for 5-10 minutes. After that, wipe the filter with a damp soft sponge. In case of severe contamination, the procedure will have to be repeated 2-3 times. When finished, wash as usual.

It turns out to be so simple and effective!

ben bryant / Shutterstock.com

Serhii Krot / Shutterstock.com

Dimmo / Shutterstock.com

This material is provided for informational purposes only. Some of the products and items discussed in this article may cause an allergic reaction and damage your health. Before use, consult a certified technician/specialist. The editorial board is not responsible for any harm or other consequences that may be caused by the use of the methods, products or items described in this article.